An air conditioner’s installation is a little bit trickier than you might expect. We’ve provided a brief, step-by-step installation guide for a domestic air condition installation in this blog post so you can get ready for the warmer months.
You’ll see that this procedure can change and vary according to the kind of air conditioner you’ve selected for your home.
If you’d like additional information about other kinds of air conditioners that are available and which ones would be best for your house kindly drop them in the comment section and we will see to that.
Now let’s go straight to the main business of the day, which is the Step by step on How to install air conditioner at home . The first thing to look out for is the best location where this air conditioner will he fixed.
Choose a location that works well.
it must be positioned at least 7 feet above the ground and attached to a wall. After determining the area, fasten a mounting plate to the wall. Next, a circular drill hole, about 3 inches in diameter will be made next to the air conditioning system so that the cables can flow through.
Also Verify that the area where you are mounting the unit is free of pipes, this is very crucial and you have to verify thoroughly. At the end part, fasten the device to the mounting plate.
It is necessary to place the external condenser at least 12 inches away from a wall. Put in close proximity to the previously drilled hole. Make sure the unit is not placed 10 feet or less from an antenna or television.
In order to provide a solid foundation for the unit, a concrete pad is positioned on the ground. Rubber pads or cushions are used to secure and dampen vibrations of the outside heat exchanger by fastening it to the concrete.
Lastly, prior to the cable passing through the wall, to connect to the external equipment, the internal wiring is examined. To guarantee the setup’s effectiveness and usefulness, a few last-minute assurances and tests are made.
Now is the time for skilled technicians to remove any air and humidity from the unit. The purpose of doing this is to ensure the operation of the air conditioning installation. Then, to increase safety and improve appearance, any exposed cabling is covered with pipe.
Turning on the equipment and making sure it’s operational is the installer’s last step. Your rooms should experience a quick, chilly air inflow if everything has been done properly.
Make sure the window you choose is sufficiently near an outlet before you begin. The majority of window air conditioners have power cords that are five to six feet long. Choose an outlet the cord reaches after determining which side of the AC the cord extends from.
Pull out your owner’s manual and follow the manufacturer’s instructions as well. Locate the center of your window after removing your air conditioner.
To verify that every part was provided, take out every piece from your box. Determine the width of your window and use a pencil to mark the middle.
Grab your window and open.
Slide the window open. If the manufacturer includes a weather strip, install it right away. These weather strips are not standard on all models, and your air conditioner will still function fully without one.
Nonetheless, these strips shield your window from any damage during the installation or removal of the air conditioner by helping to stop any air that might enter through microscopic cracks.
Fasten the Side Panels.
The panels should be slid into the proper locations on your device. After fully sliding them in, use the included screws to fasten the adjustable panels to your window air conditioner. To prevent heated air, allergies, and pollutants from entering your home, make sure all the screws are tightened.
Put your air conditioner through the window.
Move your air conditioner to the middle of your window. Next, securely shut your window on top of the air conditioner; there should be a position where it fits into place with ease. After you shut the window, your air conditioner ought to be firmly fixed.
Put L Brackets in Place
Attach the L bracket, if any, to the top of the window that has been opened. This stops the window from being forced upward, which is the main issue that arises after window air conditioners are installed.
Fasten Panels
Add window padding to the sides of your open window if it is available. To reach your window if your model does not come with padding, simply extend the side panels. Next, use the to secure the two side panels to your window.
Turn on the cooling and secure the unit.
Certain manufacturers supply the brackets and screws needed to attach the air conditioner to the interior window sill. Certain manufacturers deem it unnecessary, yet this adds an additional layer of security.
However, fasten them immediately if they are given. You’re through! Put your AC on and plug it in. Your room should start to cool down right away.
The actual installation process for portable air conditioners is very quick. You simply bring them in, make a couple of adjustments, and turn them on.
Unfortunately, the easy installation process is the only real benefit to a portable air conditioner. Their systems are often under-powered; they are used to cool leaving the customs somewhat unhappy with the result.
Disclaimer: this air conditioner installation process was brought to you by paddedvibez team of writers.Â
[
Discover more from Minsjohnfrancis
Subscribe to get the latest posts sent to your email.